Contribution of Digital Technology to the Surgical Technique of Miniscrew Insertion: a Literature Review

Orthodontic miniscrews are used to achieve absolute anchorage. Their insertion technique is simple but must be precise to avoid intra- and postoperative complications. This study aimed to review the literature on the role of digital technology in the precise placement of miniscrews and to describe the different stages of the insertion guide manufacturing chain. The databases used were PubMed, Science Direct, and Google Scholar, including the following English descriptors: "Orthodontic Anchorage Procedures," "Cone Beam Computed Tomography." Digital technology improves the accuracy of miniscrew placement by using 3D imaging to assess the quantity and quality of bone and the proximity of anatomical structures in the area to be implanted. By combining 3D imaging with the new techniques of 3D printing and virtual planning, the orthodontist can obtain a personalized placement guide for the patient using computer-aided design and manufacturing techniques. A digitally-assisted miniscrew insertion system is a promising technique for precise and safe miniscrew insertion but cannot be used routinely. Therefore, large-scale studies are needed to map miniscrew insertion in different areas, considering ethnicity, gender, and different anatomical characteristics.

Harmonização do sorriso: aliando ortodontia e estética / Smile harmonization: combining orthodontics and aesthetics

Atualmente é evidente a demanda contínua por padrões de beleza, cada vez mais impecáveis, um sorriso alinhado e harmônico com dentes brancos para se sorrir com confiança. O tratamento odontológico interdisciplinar tem como intuito proporcionar uma boa saúde periodontal, restabelecer a estética e a função do sistema estomatognático. Objetivo: apresentar um relato de caso clínico envolvendo harmonização do sorriso como cirurgia plástica periodontal para alinhamento da margem gengival na região anterior e restaurações diretas em resina composta após a finalização do tratamento ortodôntico, evidenciando a importância da abordagem conservadora e multidisciplinar no âmbito do tratamento estético. Relato de caso: Realizamos o tratamento ortodôntico com aparelho autoligado cerâmico para alinhamento do arco dental e intrusão do elemento 13, em sequência executamos um recorte gengival nos elementos 12 e 22, clareamento dental associado após 15 dias, subsequentemente, reanatomização dentária no elemento 44 para que o elemento 13 não voltasse a extruir pela falta de contato oclusal, e por fim, remodelação dental fazendo uso de resina composta nos elementos 12, 21 e 22 devido a manchas de hipocalcificação dental. Conclusão: Contudo, a estética bucal tem a capacidade de possibilitar a melhoria na autoestima, devolvendo à função, proporcionando satisfação e bem-estar ao indivíduo, enaltecendo o sorriso.

Currently, the continuous demand for increasingly impeccable beauty standards is evident, an aligned and harmonic smile with white teeth to smile with confidence. Interdisciplinary dental treatment aims to provide good periodontal health, restore the aesthetics and function of the stomatognathic system. Objective: to present a clinical case report involving smile harmonization as periodontal plastic surgery for aligning the gingival margin in the anterior region and direct composite resin restorations after completion of orthodontic treatment, highlighting the importance of a conservative and multidisciplinary approach in the field of aesthetic treatment . Case report: We performed orthodontic treatment with a self-ligating ceramic appliance for aligning the dental arch and intruding element 13, then performed a gingival cutout on elements 12 and 22, associated tooth whitening after 15 days, subsequently, dental reanatomization on element 44 to that element 13 would not extrude again due to the lack of occlusal contact, and finally, dental remodeling using composite resin in elements 12, 21 and 22 due to dental hypocalcification stains. Conclusion: However, oral aesthetics has the ability to improve self-esteem, returning to function, providing satisfaction and well-being to the individual, enhancing the smile.

Tomographic evaluation of mandibular buccal shelf in patients with different vertical growth pattern / Evaluación de la placa ósea mandibular en pacientes con diferente patrón de crecimiento vertical

The purpose of this research was the tomographic evaluation of the Mandibular Buccal Shelf (MBS) in orthodontic patients with different vertical growth pattern. An observational, descriptive, cross-sectional and retrospective study was conducted. Tomographic images of patients aged 14 to 40 years were observed and a database was formed with those that met the inclusion criteria. The sample size was 10 for each group according to vertical growth pattern (hypodivergent, normodivergent and hyperdivergent). Then four zones of frequent insertion of extralveolar mini-screws were selected in the MBS, taking as a reference the mesial and distal roots of the first and second mandibular molar. When comparing the characteristics of MBS between vertical growth patterns, between sexes and hemiarchs, no statistically significant differences were found. However, when the characteristics of MBS were compared according to the reference root, it was found that there were statistically significant differences. The vestibular area to the distal root of the second mandibular molar presented the highest values in terms of angulation, height and thickness. There are no significant differences in the bone characteristics of MBS according to vertical growth patterns, sexes or hemiarchs. Angulation, height and thickness progressively increase from the vestibular bone of the mesial root of the first mandibular molar to the distal root of the second molar.

El propósito de esta investigación fue la evaluación tomográfica de la placa ósea mandibular (POM) en pacientes de ortodoncia con diferente patrón de crecimiento vertical. Se realizó un estudio de tipo observacional, descriptivo, transversal y retrospectivo. Se observó imágenes tomográficas de pacientes de 14 a 40 años de edad y se formó una base de datos con las que cumplían los criterios de selección. El tamaño de muestra fue de 10 para cada grupo según patrón de crecimiento vertical (hipodivergentes, normodivergentes e hiperdivergentes). Luego se seleccionaron cuatro zonas de inserción frecuente de minitornillos extralveolares en la POM, tomando como referencia las raíces mesial y distal del primer y segundo molar mandibular. Al realizar la comparación de las características de la POM entre patrones de crecimiento vertical, entre sexos y hemiarcadas no se encontraron diferencias estadísticamente significativas. Sin embargo, cuando se comparó las características de la POM según la raíz de referencia se encontró que había diferencias estadísticamente significativas. La zona vestibular a la raíz distal de la segunda molar mandibular presento los mayores valores en cuanto angulación, altura y grosor. No existen diferencias significativas en las características óseas de la POM según patrones de crecimiento vertical, sexos o hemiarcadas. La angulación, la altura y el grosor aumenta progresivamente desde el hueso vestibular de la raíz mesial del primer molar mandibular hacia la raíz distal del segundo molar.

Evaluation of maxillary canine and molar movement during the first phase of extraction space closure: a multilevel analysis

ABSTRACT Objective: This study was designed to analyze and compare the cusp and apex movements of the maxillary canines and first molars during canine retraction in the first step of extraction space closure, and to evaluate if these teeth follow a curvilinear (acceleration and/or deceleration) movement rate. Material and Methods: Twenty-five patients (23.3 ± 5.1 years of age) were enrolled. The retraction of the maxillary canines was accomplished using nickel-titanium closed coil springs (100gf) on 0.020-in stainless steel archwire. Oblique cephalograms were traced and superimposed on the anatomic best fit of the maxilla (before the retraction [T0], and after one month [T1], three [T3], five [T5] and seven [T7] months). Statistics was based in a normally distributed data. Multilevel procedures were used to derive polynomials for each of the measurements. Student's t-test and one-way repeated measures ANOVA were conducted. The level of significance of 5% was adopted. Results: Canine cusps and apexes did not follow a quadratic curve regarding horizontal movement (neither accelerate nor decelerate). Canine and molar cusps showed more horizontal movement than apexes (4.80 mm vs. 2.78 mm, and 2.64 mm vs. 2.17 mm, respectively). Conclusions: Canine did not accelerate or decelerate overtime horizontally; the cusps and apexes of the canines and molars showed more horizontal movement and larger rate at the beginning of canine retraction, followed by significantly smaller and constant movement rate after the first month.

RESUMO Objetivo: O objetivo deste estudo foi analisar a movimentação das cúspides e dos ápices de caninos e primeiros molares superiores durante a retração de caninos na primeira fase do fechamento do espaço pós-extração, e avaliar se esses dentes apresentam mudança na taxa de movimentação (aceleração e/ou desaceleração). Material e Métodos: Vinte e cinco pacientes (idade = 23,3 ± 5,1 anos) foram incluídos. A retração dos caninos superiores foi realizada com molas helicoidais fechadas de níquel-titânio (100gf) em arco 0,020" de aço inoxidável. Foram feitos traçados cefalométricos de telerradiografias oblíquas e sobrepostos ao melhor ajuste anatômico da maxila (antes da retração [T0]; após um mês [T1], três meses [T3], cinco meses [T5] e sete meses [T7]). A estatística foi baseada em dados com distribuição normal. Procedimentos multiníveis foram usados para derivar polinômios para cada uma das medidas. Teste t de Student e ANOVA de uma via para medidas repetidas foram realizados, adotando-se um nível de significância de 5%. Resultados: As cúspides e os ápices dos caninos não seguiram uma curva quadrática em relação ao movimento horizontal (sem aceleração ou desaceleração). As cúspides dos caninos e molares apresentaram mais movimento horizontal do que os ápices (4,80 mm vs. 2,78 mm e 2,64 mm vs. 2,17mm, respectivamente). Conclusões: A movimentação horizontal dos caninos não acelerou ou desacelerou ao longo do tempo; as cúspides e os ápices dos caninos e molares apresentaram maior movimento horizontal e maior taxa de movimentação no início da retração dos caninos, seguida por uma taxa de movimentação significativamente menor e constante após o primeiro mês.

Short-term assessment of pain and discomfort during rapid maxillary expansion with tooth-bone-borne and tooth-borne appliances: randomized clinical trial

ABSTRACT Objective: The aim of this randomized clinical trial was to evaluate and compare, during the first week of rapid maxillary expansion (RME), the impact caused by two types of appliances: Hyrax and Hybrid Hyrax. Methods: Forty-two patients who met the eligibility criteria (aged 11-14 years, with transverse maxillary deficiency, posterior crossbite, and presence of maxillary first premolars and first permanent molars) were selected and randomly divided into two groups: TBB GROUP (tooth-bone-borne expander), treated with Hybrid Hyrax (12 females and 9 males, mean age 13.3 ± 1.3 years), and TB GROUP (tooth-borne expander), treated with Hyrax (5 females and 16 males, mean age 13.3 ± 1.4 years). Pain and discomfort were assessed in two times: after the first day of activation (T1) and four days after, by means of the numerical rate scale and the instrument MFIQ (Mandibular Functional Impairment Questionnaire). Descriptive statistics and the Mann-Whitney test were used for comparison between groups and between sexes. A 5% significance level was adopted. Results: Both appliances had a negative impact, generating pain and discomfort, and reducing functional capacity. However, the scores obtained were of low intensity and no significant differences were observed between the groups. Considering sexes, there were statistically significant differences, with the female sex presenting higher scores for pain and functional limitation. Conclusions: Despite causing impact in pain and increase in the functional limitation, these changes were of low intensity, with no statistical difference between the groups. Females were more sensitive to the impact caused by the RME.

RESUMO Objetivo: O objetivo deste ensaio clínico randomizado foi avaliar e comparar, durante a primeira semana de expansão rápida da maxila (ERM), o impacto causado por dois tipos de aparelhos: Hyrax e Hyrax Híbrido. Métodos: Quarenta e dois pacientes que atendiam aos critérios de seleção (idade de 11 a 14 anos, com deficiência transversal da maxila, mordida cruzada posterior e presença de primeiros pré-molares e primeiros molares permanentes superiores) foram selecionados e divididos aleatoriamente em dois grupos: Grupo DOS (expansor dento-osseossuportado), tratado com Hyrax Híbrido (12 mulheres e 9 homens, idade média 13,3 ± 1,3 anos), e Grupo DS (expansor dentossuportado), tratado com Hyrax (5 mulheres e 16 homens, idade média de 13,3 ± 1,4 anos). A dor e o desconforto foram avaliados em dois momentos: após o primeiro dia de ativação (T1) e após quatro dias, por meio da escala de frequência numérica e do instrumento MFIQ (Questionário de Limitação Funcional Mandibular). A estatística descritiva e o teste de Mann-Whitney foram utilizados para comparação entre os grupos e entre os sexos. Adotou-se nível de significância de 5%. Resultados: Ambos os aparelhos tiveram impacto negativo, gerando dor e desconforto e reduzindo a capacidade funcional. No entanto, os escores obtidos foram de baixa intensidade e não foram observadas diferenças significativas entre os grupos. Considerando os sexos, houve diferenças estatisticamente significativas, com o sexo feminino apresentando maiores escores para dor e limitação funcional. Conclusões: Apesar de causar impacto na dor e aumento na limitação funcional, essas alterações foram de baixa intensidade, sem diferença estatística entre os grupos. As mulheres foram mais sensíveis ao impacto causado pela ERM.

Stress distribution in lower second molar mesialization using mini-implants: a pilot study using 3D finite element analysis / Distribuição de tensões na mesialização do segundo molar inferior usando mini-implantes: um estudo piloto usando análise de elementos finitos 3D

Objective: to analyze the stress distribution in a 3D model that simulates second molar mesialization using two different types of mini-implants. Material and Methods: a mandible bone model was obtained by recomposing a computed tomography performed by a software program. The cortical and trabecular bone, a lower second molar, periodontal ligament, orthodontic tube, resin cement and the mini-implants were designed and modeled using the Rhinoceros 4.0 software program. The characteristics of self-drilling orthodontic mini-implants were: one with 7 mm length, 1 mm transmucosal neck section and 1.6 mm diameter and another with 5 mm length and 1.5 mm diameter. A total of 235.161 and 224.505 elements were used for the mesh. These models were inserted into the bone block and then subjected to loads of 200 cN (centinewton). The results were calculated and analyzed by the Ansys 17.0 software program for qualitative verification through displacement and maximum principal stress maps. Results: it was possible to observe that the periodontal ligament presented low displacement and stress values. However, the physiological values presented are among those capable to provide orthodontic movement, with compression and tensile area visualization staggered between 0.1 and -0.1 MPa (megapascal). Conclusion: within the limitations of the study, the mini-implants tested showed similar results where the load on the tooth allowed dental displacement (molar mesialization), with a tendency to rotate it, theoretically allowing the second molar to take the location of the first molar. (AU)

Objetivo: analisar a distribuição de tensões em um modelo 3D que simula a mesialização do segundo molar usando dois tipos diferentes de mini-implantes. Material e Métodos: um modelo de osso mandibular foi obtido por recomposição de uma tomografia computadorizada realizada por um software. O osso cortical e trabecular, um segundo molar inferior, ligamento periodontal, tubo ortodôntico, cimento resinoso e os mini-implantes foram projetados e modelados no software Rhinoceros 4.0. As características dos mini-implantes ortodônticos auto perfurantes foram: um com 7 mm de comprimento, 1 mm de secção transmucosa e 1,6 mm de diâmetro e outro com 5 mm de comprimento e 1,5 mm de diâmetro. Para a malha, foram utilizados 235.161 e 224.505 elementos. Esses modelos foram inseridos no bloco ósseo e então submetidos a cargas de 200 cN (centinewton). Os resultados foram calculados e analisados pelo software Ansys 17.0 para verificação qualitativa por meio de mapas de deslocamento e tensões máximas principais. Resultados: foi possível observar que o ligamento periodontal apresentou baixos valores de deslocamento e tensões. Porém, os valores fisiológicos apresentados são capazes de proporcionar movimentação ortodôntica, com visualização da área de compressão e tração escalonada entre 0,1 e -0,1 MPa (megapascal). Conclusão: dentro das limitações do estudo, os mini-implantes testados apresentaram resultados semelhantes onde a carga sobre o dente permitiu o deslocamento dentário (mesialização do molar), com tendência a girá-lo, permitindo teoricamente que o segundo molar ocupe do lugar do primeiro molar (AU)

Mechanical Properties of Mini-Implants Used in Extra-Radicular Anchorage

ABSTRACT Objective: To evaluate the mechanical properties of mini-implants (MIs) manufactured from stainless steel and compare them with conventional titanium-aluminum-vanadium alloy MIs. Material and Methods: The following groups were formed: G1 (n=24), 8×1.5 mm steel MIs; G2 (n=24), 12×2.0 mm steel MIs; and G3 (n=24), 10×1.5 mm titanium MIs. The 72 MIs were inserted in the infra zygomatic crest region of the maxilla and retromolar trigone in the jaw of 10 pigs. Pull-out, insertion torque, fracture and percussion tests were performed in order to measure the tensile strength, primary stability and fracture strength of MIs. A digital torque gauge was used to measure insertion and fracture torque, a universal mechanical testing machine was used for pull-out testing and a periotest device was used to measure the micromovement of MIs. For morphological and MI component evaluation, scanning electron microscopy (SEM) was performed. D'Agostino & Pearson, Kruskal-Wallis, and Dunn post-hoc and normality tests were used. Results: G2 insertion and fracture torques were significantly higher than G1 and G3 insertion and fracture torques (p<0.05). The pull-out and percussion tests presented similar values among the groups. SEM revealed that the fracture point was predominantly on the fourth thread for steel MIs (G1 and G2) and on the seventh thread for titanium-aluminum-vanadium MIs (G3). Conclusion: The mechanical properties of stainless steel MIs are superior to those of titanium-aluminum-vanadium alloy MIs.

Assessment of cone beam computed tomography for determining position and prognosis of interradicular mini-implants

ABSTRACT Objective: To investigate the influence of dynamic visualization of cone beam computed tomography (CBCT) scans on orthodontist's assessment of positioning status and prognosis of interradicular mini-implants (MI). Methods: Three MI positions were virtually simulated in thirty CBCT volumes: (1) MI 1 mm from the lamina dura (LD), (2) MI touching the LD and (3) MI overlapping the LD. Each position was exposed to orthodontists (n = 35) as panoramic reconstruction, sagittal reconstruction and a sequence of axial slices. Each orthodontist evaluated the MI position (relationship with the LD) and scored the prognosis using a four-point scale (the higher the score, the better the prognosis). Kappa, Friedman and Nemenyi statistics were used. Results: Statistically significant associations were detected between the prognosis scores and the type of image visualized (p<0.05). The dynamic visualization of the CBCT volume (axial slices) was associated with higher scores for prognosis and more reliable evaluation of MI positioning. Inconsistent outcomes were more frequently associated with panoramic and sagittal reconstructions. Conclusion: The dynamic visualization of axial slices allowed orthodontists to perform better assessment of MI position and considerably affected prognosis judgment.

RESUMO Objetivo: Analisar se a avaliação dinâmica de volumes de tomografia computadorizada de feixe cônico (TCFC) influencia a percepção de ortodontistas quanto à determinação da posição e do prognóstico de mini-implantes (MIs) inter-radiculares. Material e Métodos: Foram selecionados 30 volumes de TCFC, nos quais foram simuladas três formas de instalação de MIs: 1) MI a 1 mm de distância da lâmina dura (LD); 2) MI tocando a LD; e 3) MI sobreposto à LD. As imagens foram examinadas por 35 ortodontistas na forma de reconstruções panorâmicas, reconstruções sagitais e uma sequência de reconstruções axiais. Os examinadores avaliaram a relação entre o MI e a LD, e indicaram o prognóstico dos MIs instalados, usando uma escala de 4 pontos (quanto maior o escore, mais favorável o prognóstico). Os dados foram submetidos à análise estatística, por meio dos testes de Kappa, Friedman e Nemenyi. Resultados: Houve associação significativa entre o prognóstico, os tipos de imagem e as três formas de inserção dos MIs (p<0,05). A visualização dinâmica dos volumes de TCFC (reconstruções axiais) foi associada a maiores escores para o prognóstico e a avaliações mais confiáveis da posição dos MIs. Escores mais inconsistentes e discordantes foram mais associados às reconstruções panorâmicas e sagitais. Conclusão: A análise do volume tomográfico em reconstruções axiais pode melhorar a avaliação do ortodontista quanto à posição dos MIs inter-radiculares, apresentando impacto significativo na determinação do prognóstico do caso.

Evaluation of the clinical effectiveness of miniscrews in class i and ii malocclusion patients: a systematic review and meta-analysis

Aim: The present systematic review and meta-analysis aimed to evaluate the clinical effectiveness of miniscrews in Class I and II Malocclusion Patients. Methods: From electronic databases, between 2010 and 2020, PubMed, Embase, Cochrane Library, ISI were used to conduct systematic literature. Two reviewers extracted data blindly and independently from the abstract and full text of the studies they used for data extraction. The mean differences between the two groups (miniscrews vs. conventional anchorage) with a 95 % confidence interval (CI), the Inverse-variance method, and the fixed-effect model were calculated. The Meta-analysis was evaluated using the statistical software Stata/MP v.16 (The fastest version of Stata). Results: A total of 186 potentially relevant titles and abstracts were found during the electronic and manual search. Finally, the inclusion criteria required for this systematic review were met by a total of seven publications. The mean difference of molar mesiodistal movement among seven studies and heterogeneity was -0.53 mm (MD, -0.53 95 % CI -0.69, -0.38. P= 0.00) (I2 = 96.52 %). This result showed maximum reinforcement in miniscrews with fewer mesial movements. Conclusion: The result of the current systematic review and meta-analysis shows that miniscrews in patients with class II and I malocclusion help maintain better anchorage preservation than traditional anchorage devices

Mucositis periimplantaria asociada a ortodoncia correctiva / Peri-implant mucositis associated to corrective orthodontics

Introducción: Los minitornillos de ortodoncia son dispositivos temporales de anclaje utilizados ampliamente en ortodoncia correctiva. Sin embargo, se ha reportado en la literatura que su tasa clínica de éxito no es completa debido a que pueden existir fallas relacionadas con la pérdida de su estabilidad. Varios factores pueden comprometer el anclaje y están relacionados con el tipo de implante, su manejo quirúrgico y el hospedero. Dentro de este último, se encuentra la inflamación del tejido periimplantario o mucositis que, aunque reversible, es necesario su tratamiento temprano para evitar su progresión a la afectación de tejido duro (periimplantitis). Objetivo: Describir un caso clínico de mucositis periimplantaria asociada a un dispositivo de anclaje ortodóntico temporal. Presentación del caso: Paciente femenina que acudió a la consulta por presentar dolor en la zona anterior del maxilar superior. Durante el examen intraoral se observó que usaba aparatos de ortodoncia con mecanismo de anclaje: dos minitornillos de ortodoncia ubicados al nivel de los caninos superiores. Se realizó la remoción quirúrgica de los minitornillos de ortodoncia, se le indicó el uso de antibióticos y se realizó estudio histopatológico para descartar malignidad. Se diagnosticó con mucositis periimplantaria. Conclusiones: La remoción quirúrgica de los minitornillos de ortodoncia es una excelente alternativa para evitar la progresión de la lesión hacia los tejidos duros. A través de esta técnica lograron eliminar signos de dolor, enrojecimiento y sangrado(AU)

Introduction: Orthodontic miniscrews are temporary anchorage devices widely used in corrective orthodontics. However, it has been reported in the literature that their clinical success rate is not high, due to failures related to the loss of stability. Anchorage may be affected by factors associated to the type of implant, its surgical management and the host. Host-related factors include peri-implant tissue inflammation or mucositis, which though reversible, its early treatment is necessary to prevent expansion into and damage to the hard tissue (peri-implantitis). Objective: Describe a clinical case of peri-implant mucositis associated to a temporary orthodontic anchorage device. Case presentation: A female patient attends clinical consultation with pain in the anterior zone of her upper maxilla. Intraoral examination revealed the presence of orthodontic appliances with an anchorage mechanism: two orthodontic miniscrews located at the level of the upper canines. Surgical removal was performed of the orthodontic miniscrews, antibiotics were indicated and histopathological testing was conducted to rule out malignancy. The patient was diagnosed with peri-implant mucositis. Conclusions: Surgical removal of orthodontic miniscrews is an excellent alternative to prevent the progress of the lesion into hard tissues. Pain signs, reddening and bleeding were all eliminated with the technique applied(AU)

Resultados del uso de mini-implantes como anclaje para el movimiento de intrusión molar en Ortodoncia / Outcomes on the use of mini-implants as an anchorage in Orthodontics molar intrusion movement

RESUMEN Fundamento: La intrusión dentaria es uno de los movimientos más peligrosos en ortodoncia, para lograrlo se requiere, en ocasiones, del anclaje máximo que ofrecen los mini-implantes. Objetivo: Evaluar el uso de mini-implantes como anclaje en el movimiento de intrusión molar. Metodología: Se realizó un estudio de tipo preexperimental con 6 pacientes que necesitaban intrusión del molar, en la Clínica Estomatológica Provincial de Sancti Spíritus en el periodo de 2011 a 2014. Se utilizaron métodos del nivel teórico y empírico y se estudiaron las variables: estabilidad, ubicación del mini-implante, magnitud de la fuerza, tiempo para lograr el movimiento de intrusión, alteraciones clínicas asociadas y aceptación del paciente. Resultados: Presentaron alta estabilidad de los mini-implantes 3 pacientes y movilidad inferior a 1 mm los 3 restantes. Las complicaciones clínicas más frecuentes fueron la inflamación y el sangrado; el movimiento de intrusión en un tiempo promedio de 8 a 9 meses se logró en 5 pacientes y solo 1 paciente requirió el retiro del mini-implante. El nivel de aceptación por parte de los pacientes fue Medio. Conclusiones: Los resultados del uso de los mini-implantes como anclaje para el movimiento de intrusión molar fueron favorables en los pacientes tratados.

ABSTRACT Background: Tooth intrusion is one of the most dangerous movements in orthodontics, it requires sometimes the maximum anchorage offered by mini-implants. Objective: To evaluate the use of mini-implants as anchorage in molar intrusion movement. Methodology: It was conducted a pre-experimental study with 6 patients who needed molar intrusion, at the Sancti Spíritus Provincial Stomatology Clinic from 2011 to 2014. Theoretical and empirical methods were used and the succeeding variables were studied: stability, mini-implant location, force magnitude, intrusion movement time, associated clinical alterations and patient acceptance. Results: 3 patients showed mini-implants high stability and mobility lower than 1 mm in the remaining 3. The most frequent clinical complications were inflammation and bleeding; intrusion movement was achieved in an average time from 8 to 9 months in 5 patients and only 1 patient required the mini-implant removal. The patient´s level of acceptance was Medium. Conclusions: Outcomes on the use of mini-implants as anchorage in molar intrusion movement were satisfactory in the treated patients.

Structural resistance of orthodontic mini-screws inserted for extraalveolar anchorage / Resistência estrutural de mini-aparafusos ortodônticos inseridos para ancoragem extra-alveolar

ABSTRACT The risk of fracture or strain in mini-screws is higher if diameter, length, type of alloy or insertion angle is selected inappropriately. The aims of this study were to test the structural resistance of two types of orthodontic mini-screws -one made of stainless steel and another of titanium- from an international brand and to evaluate the efficacy of two other titanium miniscrews of Brazilian origin, during an extra-alveolar anchorage procedure. The mini-screws analyzed were: Bomei stainless steel and Bomei titanium/Taiwan, Morelli titanium and Neodent titanium/ Brazil. Experiments were conducted on pig mandibles to simulate the process of extra-alveolar anchorage. Two insertion processes were used: Direct at 30°, and Indirect, starting at 60° and ending at 30° with gradual continuous movement. Strain was evaluated using Optical and Scanning Electron Microscopy. Data were evaluated using Kruskal-Wallis non-parametric statistical analysis and post hoc Tamhane test. Significant statistical differences in strain were observed among the mini-screws used in the extra-alveolar insertions, both for the direct and indirect procedures. In the indirect insertion tests, both stainless steel and titanium mini-screws suffered deformation, showing that angling can be an important factor in mini-screw failure rates. The change in angle during the insertion movement increased deformation rates independently of alloy type, increasing the risk offailure. These results could help orthodontists in choosing mini-screws for extra-alveolar anchorage, which can be performed with direct or indirect insertion. In vivo studies should be conducted to confirm the findings of this study.

RESUMO O risco de fratura ou tensao nos mini-parafusos é maior se o diámetro, comprimento, tipo de liga ou ángulo de insergao for selecionado de forma inadequada. Os objetivos deste estudo foram testar a resistencia estrutural de dois tipos de mini-aparafusos ortodónticos -um feito de ago inoxidável e outro de titànio- de uma marca internacional e avaliar a eficácia de dois outros mini-parafusos de titànio de origem brasileira, durante um procedimento de ancoragem extra-alveolar. Os mini-aparafusos analisados foram: Bomei ago inoxidável e Bomei titànio / Taiwan, Morelli titànio e Neodent titànio / Brasil. Foram realizadas experiencias em mandíbulas de porcos para simular o processo de ancoragem extra-alveolar. Foram utilizados dois processos de insergao (Direta a 30°, e Indireta, comegando a 60° e terminando a 30° com movimento gradual continuo). A deformagao foi avaliada utilizando Microscopia Optica e Microscopia Eletrónica de Varredura. Os dados foram avaliados utilizando análise estatistica nao paramétrica Kruskal-Wallis e testepost-hoc Tamhane. Diferengas estatisticas significativas na deformagao foram observadas entre os mini-parafusos utilizados nas insergoes extra-alveolares, tanto para os procedimentos diretos como indiretos. Nos testes de insergao indireta, tanto os mini-parafusos de ago inoxidável como os de titánio sofreram deformagao, mostrando que a angulagao pode ser um fator importante nas taxas de falha dos mini-parafusos. A mudanga no ángulo durante o movimento de insergao aumentou as taxas de deformagao independentemente do tipo de liga, aumentando o risco de falha. Estes resultados podem ajudar os ortodontistas na escolha de mini-parafusos para ancoragem extra-alveolar, que pode ser realizada com insergao direta ou indireta. Estudos in vivo devem ser conduzidos para confirmar os resultados deste estudo.

Sitios anatómicos para la inserción de microtornillos interradiculares como dispositivos de anclaje temporal en tratamientos de ortodoncia / Anatomical sites for the insertion of interradicular miniscrews as temporary anchoring devices in orthodontic treatments

Los microtornillos interradiculares (MTI) son dispositivos de uso temporal diseñados para ser insertados en el hueso alveolar con la finalidad de mejorar el anclaje. El objetivo de este estudio fue presentar una guía para odontólogos que permita identificar los sitios anatómicos más apropiados para la inserción de estos dispositivos, logrando así, una mayor tasa de éxito clínico en los tratamientos. PUBMED, Google Académico y SciELO fueron las bases de datos utilizadas para la búsqueda de la literatura, se consideraron artículos publicados entre los años 2000 y 2020, en inglés y en español. Nuestra revisión sugiere según la bibliografía actual, realizar una planificación al comienzo del tratamiento de ortodoncia, utilizando guías generales para la inserción de MTI a través de mapas visuales de "zonas seguras" que existen entre los espacios interradiculares. Para estos, se consideró que la mínima cantidad de hueso alveolar debía ser de 3 mm.

Interradicular miniscrews (MTI) are temporary devices designed to be inserted into the alveolar bone in order to improve anchorage. The aim of this study was to present a guide for dentists that allows identifying the most appropriate anatomical sites for the insertion of these devices, thus achieving a higher clinical success rate in treatments. PUBMED, Google Scholar and SciELO were the databases used to search the literature; articles published between 2000 and 2020, in English and Spanish, were considered. Our review suggests, according to the current bibliography, planning at the beginning of orthodontic treatment, using general guidelines for the insertion of MTI through visual maps of "safe areas" that exist between the inter-root spaces. For these, it was considered that the minimum amount of alveolar bone should be 3 mm.

Anclaje esquelético para el tratamiento de las anomalías de clase II y mordida abierta anterior: informe de un caso / Skeletal anchorage for the treatment of class II anomalies and anterior open bite: report of a case

El reporte de este caso tiene como objetivo demostrar la utilidad de los anclajes esqueléticos temporarios como son las miniplacas cigomáticas y los microimplantes "buccal shelf" en el tratamiento ortodóncico, en una paciente de 17 años 10 meses de edad, clase II vertical, dólicofacial, con mordida abierta anterior y aumento de la altura facial inferior. Después de la primera fase de tratamiento, siguiendo la secuencia de arcos para completar la alineación, se utilizaron anclajes esqueléticos extrarradiculares con una mecánica de intrusión con fuerzas elásticas durante 10 meses. Se intruyeron sus piezas posteriores superiores e inferiores y se distalizó la arcada superior, corrigiéndose la oclusión. El mentón retrognático y su perfil convexo mejoraron con la autorrotación de la mandíbula (AU)

The objective of this report case is to demonstrate the usefulness of temporary skeletal anchors such as zygomatic miniplates and buccal shelf microimplants in orthodontic treatment, in a 17-year-old 10-month-old, vertical class II, dollicofacial patient with anterior open bite and increased lower facial height. After the first treatment phase, following the arch sequence to complete the alignment, extra-radicular skeletal anchors were used with intrusion mechanics with elastic forces for 10 months. Its upper and lower posterior pieces were intruded and the upper arch was distalized, correcting the occlusion. e retrognathic chin and its convex profile improved with autorotation of the jaw (AU)

Zygomatic-maxillary cortical bone thickness in hyper, normo and hypodivergent patients

ABSTRACT Objective: The aim of this study was to evaluate the thickness of the zygomatic-maxillary cortical bone using computed tomography in different skeletal patterns. Methods: A total of 54 patients of both sexes, divided into three groups according to the vertical skeletal pattern, were evaluated for cortical bone thickness of the anterior slope of the zygomatic process of the maxilla, using cone beam computed tomography. Measurements were made at 2mm, 4mm, 6mm, 8mm and 10mm above from first molar mesial root apex. Vertical skeletal pattern was determined by Frankfurt mandibular angle (FMA). Results: The hyperdivergent pattern had the lowest cortical thickness value, nevertheless, no patient in the hyperdivergent group presented cortical thickness exceeding 2mm, and no patient in the hypodivergent group presented cortical thickness less than 1mm. However, the correlation between cortical thickness and mandibular plane angle was weak and not significant. Conclusion: Although higher prevalence of thick cortical was observed in the hypodivergent patients, and thin cortical groups in the hyperdivergent group, the vertical skeletal pattern could not be used as determinant of the zygomatic-maxillary cortical thickness.

RESUMO Objetivo: O objetivo do presente estudo foi avaliar a espessura da cortical óssea zigomático-maxilar por meio de tomografia computadorizada em diferentes padrões esqueléticos. Métodos: Um total de 54 pacientes de ambos os sexos, divididos em três grupos, de acordo com o padrão esquelético vertical, foi avaliado quanto à espessura da cortical óssea na vertente anterior do processo zigomático da maxila, por meio de tomografia computadorizada de feixe cônico. As medidas foram feitas a 2mm, 4mm, 6mm, 8mm e 10mm acima do ápice da raiz mesial do primeiro molar. O padrão esquelético vertical foi determinado pelo Ângulo do Plano Mandibular (FMA). Resultados: O padrão hiperdivergente apresentou o menor valor de espessura de cortical. No entanto, nenhum paciente do grupo hiperdivergente apresentou espessura cortical superior a 2mm e nenhum paciente do grupo hipodivergente apresentou espessura cortical inferior a 1mm. No entanto, a correlação entre a espessura da cortical e o ângulo do plano mandibular foi fraca e não significativa. Conclusão: Embora tenha havido uma maior prevalência de cortical espessa no grupo hipodivergente e cortical fina no grupo hiperdivergente, o padrão esquelético vertical não pode ser utilizado como determinante da espessura cortical zigomático-maxilar.

Conservative treatment in adult patient with reimplanted anterior teeth after traumatic avulsion with extensive bone loss: an 8-year follow-up

ABSTRACT Introduction: Orthodontic treatment in patients with traumatized teeth is a condition that needs good planning in order to achieve satisfactory results. Objective: To discuss approaches to orthodontic treatment of malocclusions associated with trauma followed by avulsion of anterior teeth, reimplanted after a short period of time. Case report: The treatment started with the distalization of upper posterior teeth, with the aid of mini-implants and sliding jigs, followed by the inclusion of anterior teeth in the arch, followed by intrusion of these teeth. Results: With the treatment, improved mobility of the anterior teeth was achieved, with better insertion into bone tissue. The most important factor for satisfactory treatment and a good prognosis for avulsion is the time the tooth remains outside the socket. Orthodontic treatment in patients with traumatized teeth is not contraindicated; however, clinical and radiographic aspects must be considered. Conclusion: Among the feasible orthodontic treatment options, the conservative approach can be a very favorable treatment alternative.

RESUMO Introdução: O tratamento ortodôntico em pacientes com dentes traumatizados é uma condição que necessita de um bom planejamento, a fim de se conseguir resultados satisfatórios. Objetivo: Discutir as abordagens de tratamento ortodôntico de más oclusões associadas ao trauma seguido de avulsão de dentes anteriores, reimplantados após curto espaço de tempo. Relato do Caso: O tratamento realizado iniciou-se com a distalização dos dentes posteriores superiores, com auxílio de mini-implantes e sliding jigs, seguida da inclusão dos dentes anteriores na arcada e intrusão desses dentes. Resultados: Com a realização do tratamento, conseguiu-se melhoria na mobilidade dos dentes anteriores, com inserção mais favorável no tecido ósseo. O fator mais importante para o tratamento satisfatório e um bom prognóstico da avulsão é o tempo em que o dente permanece fora do alvéolo. O tratamento ortodôntico em pacientes com dentes traumatizados não é contraindicado; porém, aspectos clínicos e radiográficos devem ser considerados. Conclusão: Entre as opções de tratamento ortodôntico factíveis, a abordagem conservadora pode ser uma opção de tratamento bastante favorável.

Evaluation of the palatal bone in different facial patterns for orthodontic mini-implants insertion: A cone-beam computed tomography study

ABSTRACT Objective: Evaluate the height, thickness and cortical density of the palatal bone of adults with different vertical facial patterns using Cone-Beam Computed Tomography (CBCT). Methods: This study analyzed 75 CBCTs of patients between 18 and 35 years old (45 men and 30 women). The CBCTs were classified into three groups based on their facial pattern: normodivergent, hypodivergent and hyperdivergent as determined from lateral cephalograms synthesized from the CBCTs. The height, cortical thickness and cortical density of the palatal bone were measured at 4, 8, 12, 16 and 20mm posterior to the incisive foramen, and at 3, 6 and 9mm lateral to the midpalatal suture. ANOVA with Tukey post-hoc tests were used for analysis of the data, at significance level of p< 0.05. Results: The hypodivergent pattern had a significant difference and the greatest height and cortical thickness of the palatal bone, followed by the hyperdivergent and the normodivergent patterns. No significant differences were found in minimum and maximum values of cortical density. Conclusion: The palatal bone is a favorable anatomical area to install different orthodontic temporary anchorage devices (TADs), where individuals with the hypodivergent vertical facial pattern have a higher height and cortical thickness of the palatal bone, followed by the hyperdivergent pattern and finally the normodivergent pattern. No significant differences in the cortical density of the palatal bone in the three facial patterns were found.

RESUMO Objetivo: Avaliar a altura, a espessura e a densidade cortical do osso palatino em adultos com diferentes padrões faciais verticais, utilizando a tomografia computadorizada de feixe cônico (TCFC). Métodos: O presente estudo analisou 75 TCFCs de pacientes com idades entre 18 e 35 anos (45 homens e 30 mulheres). As TCFCs foram classificadas em três grupos, de acordo com seus padrões faciais: normodivergentes, hipodivergentes e hiperdivergentes, conforme determinado na radiografia cefalométrica lateral reconstruída das TCFCs. Altura, espessura e densidade cortical do osso palatino foram aferidas a 4, 8, 12, 16 e 20 mm para posterior do forame incisivo e a 3, 6 e 9 mm lateralmente à sutura transpalatina. Os testes ANOVA e post-hoc de Tukey foram utilizados para análise dos dados, com nível de significância de p< 0,05. Resultados: O padrão hipodivergente apresentou uma diferença significativa e a maior altura e espessura cortical do osso palatino, seguido pelos padrões hiperdivergente e normodivergente. Nenhuma diferença estatisticamente significativa foi encontrada nos valores mínimos e máximos da densidade cortical. Conclusão: O osso palatino é uma área anatomicamente favorável para instalar diferentes dispositivos de ancoragem temporária. Indivíduos com padrão facial vertical hipodivergente apresentam maior altura e espessura cortical do osso palatino, seguido do padrão hiperdivergente e finalmente do padrão normodivergente. Não foi encontrada qualquer diferença significativa na densidade cortical do osso palatino entre os três padrões faciais.

Miniscrew-assisted rapid palatal expansion (MARPE): how to achieve greater stability. In vitro study

ABSTRACT Objective: Assess the influence of mono- and bicortical anchorage and diameter of mini-implants (MIs) on the primary stability of these devices. Methods: 60 self-drilling MIs were distributed in six groups according to diameter (1.5mm, 1.8mm or 2.0mm) and type of anchorage (monocortical and bicortical) in bovine rib. The primary stability was evaluated by insertion torque, micromobility and pull-out strength tests. ANOVA and/or Tukey analysis were used to conduct intergroup comparisons (p< 0.05). Non-parametric statistics (Kruskal-Wallis and Mann-Whitney) were performed when normality was not found (p< 0.05). Results: MIs with larger diameters and bicortical anchorage showed greater primary stability regarding insertion torque (p< 0.05) and micromobility (p< 0.05). Only MI diameter had an effect on the pull-out strength test. Larger diameter MIs presented better retention in pull-out strength tests (p< 0.001), regardless of mono- or bicortical anchorage. Conclusions: MI primary stability is dependent on its diameter and type of anchorage. Bicortical anchorage showed greater stability when compared with monocortical anchorage, independently of other variables.

RESUMO Objetivo: Avaliar a influência da ancoragem mono e bicortical e do diâmetro dos mini-implantes (MIs) na estabilidade primária desses dispositivos. Métodos: 60 MIs autoperfurantes foram distribuídos em seis grupos, de acordo com o diâmetro (1,5 mm, 1,8 mm ou 2,0 mm) e tipo de ancoragem (monocortical e bicortical), e inseridos em costela bovina. A estabilidade primária foi avaliada pelos testes de torque de inserção, micromobilidade e resistência à tração. ANOVA e/ou análise de Tukey foram usadas para realizar comparações intergrupos (p< 0,05). Estatística não paramétrica (Kruskal-Wallis e Mann-Whitney) foi realizada quando a normalidade não foi encontrada (p< 0,05). Resultados: MIs com diâmetros maiores e ancorados bicorticalmente apresentaram maior estabilidade primária em relação ao torque de inserção (p< 0,05) e micromobilidade (p< 0,05). Apenas o diâmetro do MI influenciou os resultados do teste de resistência à tração. MIs de maior diâmetro apresentaram melhor retenção nos testes de resistência à tração (p< 0,001), independentemente da ancoragem mono ou bicortical. Conclusões: a estabilidade primária do MI é dependente de seu diâmetro e tipo de ancoragem. A ancoragem bicortical apresentou maior estabilidade quando comparada à ancoragem monocortical, independentemente das demais variáveis.

Comprehensive approach to simultaneous molar intrusion and canine retraction in the treatment of Class II anterior open bite using miniscrew anchorage

ABSTRACT Introduction: Anterior open bite is one of the most difficult malocclusions to correct in orthodontic treatment. Molar intrusion using miniscrew anchorage has been developed as a new strategy for open bite correction; however, this procedure still has an important concern about prolonged treatment duration in the patient with anteroposterior discrepancy due to the separate step-by-step movement of anterior and posterior teeth. Objective: This article illustrates a comprehensive orthodontic approach for dentoalveolar open bite correction of an adult patient, by using miniscrew. Case report: A woman 19 years and 5 months of age had chief complaints of difficulty chewing with the anterior teeth and maxillary incisor protrusion. An open bite of -2.0 mm caused by slight elongation of the maxillary molars was found. The patient was diagnosed with Angle Class II malocclusion with anterior open bite due to the vertical elongation of maxillary molars. After extraction of the maxillary first premolars, concurrent movements of molar intrusion and canine retraction were initiated with the combined use of sectional archwires, elastic chains and miniscrews. Results: At 4 months after the procedure, positive overbite was achieved subsequent to the intrusion of maxillary molars by 1.5 mm and without undesirable side effects. Class I canine relation was also achieved at the same time. The total active treatment period was 21 months. The resultant occlusion and satisfactory facial profile were maintained after 54 months of retention. Conclusion: The presented treatment shows the potential to shorten the treatment duration and to contribute to the long-term stability for open bite correction.

RESUMO Introdução: A mordida aberta anterior é um dos tipos de má oclusão mais difíceis de se corrigir no tratamento ortodôntico. A intrusão de molares usando ancoragem em mini-implantes foi desenvolvida como uma nova estratégia para a correção da mordida aberta. Entretanto, ainda há preocupações quanto à longa duração desse tratamento em pacientes com discrepâncias anteroposteriores, já que os dentes anteriores são movimentados em etapa distinta dos posteriores. Objetivo: Este artigo descreve uma abordagem ampla para a correção da mordida aberta dentoalveolar em uma paciente adulta, usando mini-implantes. Relato de caso: Uma paciente de 19 anos e 5 meses de idade procurou tratamento apresentando como queixas principais a dificuldade de mastigar com os dentes anteriores e a protrusão dos incisivos superiores. Verificou-se, ainda, mordida aberta de -2,0 mm, causada por um comprimento levemente maior dos molares superiores. A paciente foi diagnosticada com má oclusão de Classe II de Angle com mordida aberta anterior devido à dimensão vertical aumentada dos molares superiores. Após a extração dos primeiros pré-molares superiores, iniciou-se movimentos simultâneos de intrusão dos molares e retração dos caninos, com o uso combinado de arcos seccionados, elásticos em cadeia e mini-implantes. Resultados: Após quatro meses em tratamento, alcançou-se uma sobremordida positiva, devido à intrusão de 1,5 mm dos molares superiores, sem qualquer efeito colateral indesejável. Ao mesmo tempo, também alcançou-se relação de Classe I nos caninos. O tempo total de tratamento ativo foi de 21 meses. A oclusão e o perfil facial satisfatório alcançados ao fim do tratamento mantiveram-se após 54 meses em contenção. Conclusão: A abordagem aqui apresentada tem o potencial de encurtar a duração do tratamento e contribuir para a estabilidade em longo prazo da correção da mordida aberta.

Severe hemorrhage in a patient with dengue hemorrhagic fever after insertion of orthodontic mini-implants. A case report / Hemorragia severa em paciente com dengue hemorrágica após instalação de miniimplante ortodôntico

The objective of this paper is to report a clinical case of a patient who after installing an orthodontic mini-implant returned to the dental office seven days later with a severe hemorrhage where it was inserted. Because of the severe character of the hemorrhage, the mini-implant was removed, local compression was performed, medication to control bleeding was given and some lab tests were requested. The patient returned in 24 hours with diagnosis of dengue hemorrhagic fever (DHF). The patient was referred to the specialized hematology service where the diagnosis was confirmed. Past the critical period, a new mini-implant was inserted to continue the orthodontic treatment. It can be concluded from this account that despite the mini-implants being devices of simple installation and easy removal, it is important that the patient's systemic conditions are optimal for their overall effectiveness (AU)

The objective of this paper is to report a clinical case of a patient who after installing an orthodontic mini-implant returned to the dental office seven days later with a severe hemorrhage where it was inserted. Because of the severe character of the hemorrhage, the mini-implant was removed, local compression was performed, medication to control bleeding was given and some lab tests were requested. The patient returned in 24 hours with diagnosis of dengue hemorrhagic fever (DHF). The patient was referred to the specialized hematology service where the diagnosis was confirmed. Past the critical period, a new mini-implant was inserted to continue the orthodontic treatment. It can be concluded from this account that despite the mini-implants being devices of simple installation and easy removal, it is important that the patient's systemic conditions are optimal for their overall effectiveness (AU)